Fiber-Optic Extension Link

Opticis fiber-optic extension solution including DVI, HDMI, SDI, DisplayPort, USB, and FireWire will meet the requirement of various industries and customers making a strong move for simple, reliable and crystal clear quality of signal transmission with powerful features to transmit longer distances and anability to accommodate a full compatibility and intelligent management of all devices within an integrated system.

HDFX-150-TR Featured

Rate this item
(27 votes)
Optical HDMI extender, HDFX-150-TR is designed compact enough to be fitted into various installation environment with four (4) LC fibers connection. The transmitter and receiver set, HDFX-150-TR enables to transmit WUXGA (1920x1200) or 1080p at 60Hz signal up to 300m (985 feet), avoiding any tricks like scaling or data  compression for lessening a burden of data transmission and supports 3D contents transmission. The pure fiber connection between transmitter and receiver, gives clean, secure and easy installation with perfect electrical isolation, but without electrical hazard and interference. The HDFX-150-TR can be operated by both USB power by plugging the USB cable…

OPS-xyz Featured

Rate this item
(27 votes)
Opticis new optical passive splitter, OPS--xyz distributes optical signal over single-mode fiber up to 16 channels without any active device or electrical power to maximize the efficiency and minimize the cost of digital signage installation. Two (2) units of OPS-xyz can be fitted into 19" 1RU frame. Optical passive splitter, OPS-xyz will take some fundamental changes again to all industry and its participants with simple but powerful features and competitive price beyond others. Configurations: • OPS-104S: 1x4 SC optical splitter • OPS-108S: 1x8 SC optical splitter • OPS-116S: 1x16 SC optical splitter • OPS-408S: 4x8 (1x2,2EA) SC optical Splitter •…

DDFX-100-TR Featured

Rate this item
(34 votes)
DDFX-100-TR; Two (2) fiber Detachable Dual-Link DVI Module The detachable Dula-Link DVI extender DDFX-100-TR offers easy connection to your existing system with minimum efforts and no modification, since it is designed compactly enough and with all industry standard connectors. The metallic die-casting enclosure gives reliable installation, excellent EMI shields and heat dissipation in harsh and noisy environments. DDFX-100-TR transmits uncompressed WQXGA (2560x1600), 60Hz or WQUXGA (3840x2400), 33Hz refresh ratio of Dual-Link DVI up to 500 meters (1640 feet) over two (2) LC multi-mode fibers. The EDID in a display can be read and restored by just plugging once transmitter to…
Rate this item
(0 votes)
Detachable HDMI 2.0 active optical cable, HDFC-200D, enables to transmit 4K (4096x2160) at 60Hz signal up to 100m (384feet) over plenum graded & LSZH hybrid cable. It avoids any scaling or data compression for lessening a burden of data transmission.   HDFC-200D is designed compact enough to be fitted into various installation environments with cutting edge technology performance.    HDFC-200D offers perfect flexibility during installation by separating HDMI connector part and Active Optical Cable part. It gives slim, light, easy installation like a general copper HDMI cable.    It can be operated by external USB power on the RX side…
Rate this item
(0 votes)
Detachable DisplayPort 1.2 active optical cable, DPFC-200D, enables to transmit 4K (4096x2160) at 60Hz signal up to 100m (384feet) over plenum graded & LSZH hybrid cable. It avoids any scaling or data compression for lessening a burden of data transmission.   DPFC-200D is designed compact enough to be fitted into various installation environments with cutting edge technology performance.    DPFC-200D offers perfect flexibility during installation by separating DisplayPort connector part and Active Optical Cable part. It gives slim, light, easy installation like a general copper DisplayPort cable.    Optional USB power cable on RX side can be provided upon request…
Rate this item
(1 Vote)
HDMI 2.0 optical fiber detachable extender, HDFX-300, extends HDMI 2.0 signal up to 100m (328feet) and transmits 4K UHD (4096x2160) at 60Hz over one duplex LC multi-mode fibers. Leading-edge technology of Opticis allows long distance transmission of 4K signal without any video/audio degradation.   HDFX-300 is designed compact enough to be fitted into various installation environments. It gives slim, light, easy installation with perfect electrical isolation, but without electrical hazard and interference.   High-Retention HDMI connector, which allows for more retention force than standard HDMI connector, prevents accidental disconnection.   HDFX-300 is compliant with HDMI standards features like CEC, EDID…
Rate this item
(9 votes)
IPVDS-500-ED is 4K HDMI IP Video Wall Control solution for playing multi-sources of Audio/Video such as PC, media player, Blu-ray and etc, on the video wall display and even other displays simultaneously. It also enables to split a high quality video into multiple videos and play it on video wall displays and other displays.   IPVDS-500-ED can provide an optimal solution for large video wall systems in control room, security and traffic control whereas it can be used in general field such as conference room, education room or presentation room. PC program can be used for host allocation and preview…
Rate this item
(12 votes)
HDMI 2.0 active optical cable, HDFC-200, enables to transmit 4K (4096x2160) at 60Hz signal up to 100m (384feet) over plenum graded & LSZH hybrid cable. It avoids any scaling or data compression for lessening a burden of data transmission.   HDFC-200 is designed compact enough to be fitted into various installation environments with cutting edge technology performance.    It gives slim, light, easy installation like a general copper HDMI cable. It can be operated by external USB power on the RX side of the cable. For the devices with insufficient power supply from HDMI source such as media player or…
Rate this item
(23 votes)
New active optical DVI cable, DVFC-100 is designed compact enough to be fitted into various installation environments. The DVFC-100 enables to transmit WUXGA (1920x1200) or 1080p at 60Hz (4K 30Hz) signal up to 100m (328feet) over hybrid cable, avoiding any tricks such as scaling or data compression for lessening a burden of data transmission.   The DVFC-100 gives slim, light, easy installation like a general copper DVI cable. With low power consumption technology in OPTICIS, the DVFC-100 can be operated by DDC 5V in DVI port without any external DC power or USB power.   It supports EDID, HDCP (High…
Rate this item
(24 votes)
The new HDMI HD-BaseT extender, HDCX-100 has one CAT5e or CAT6 cable connection and is designed compact enough to be fitted in to various installation environment.   The HDCX-100 with the same mechanical dimension for each of transmitter and Receiver enables to transmit the HDMI2.0 up to 4K((YCbCr4:2:0) at 60Hz, avoiding any tricks like scaling or data compression for lessening a burden of data transmission.   Between its transmitter and receiver, CAT5e/CAT6 connection by RJ45 Connector gives clean, secure and easy installation. The maximum extension is 100m(328feets). Features: • Supports 4K and HDMI2.0 standards  • Extends WQUXGA (3840x2160) at 60Hz…
Rate this item
(21 votes)
The OPTICIS 4K HDMI IP Video Wall Extender, IPVDS-500-ED offers advanced wall management service in order to give perfect solution for accommodating medium-sized and larger multi-board configurations such as control room, security, traffic management and small-scale single-board systems for conference, classroom presentations.   The transmitter, IPVDS-500-E (Encoder) connected to a HDMI source, encodes the video with data and transmits it over Ethernet. The receiver, IPVDS-500-D (Decoder) connected to a display, receives the encoded signal over network and decodes it to regenerates the video and data for users.    The provided PC program makes possible the creation, editing, save and pre-set…
Rate this item
(22 votes)
New DisplayPort 1.2 Repeater, DPAX is designed compact enough to be fitted into various installation environments with DisplayPort cables. DPAX enables to transmit 4K UHD(3840×2160) signals up to 8m (26feet) over DisplayPort copper cables without any data compression or scaling.    Features: • Complies with DisplayPort 1.2 standards  • Supports Ultra High Definition(up to 3840×2160) at 60Hz • Offers data recovery function • Transmits DisplayPort 1.2 data up to 8m (26feet) over copper cables.    3m from the Source / 5m to the Display at DP1.2    5m from the Source / 10m to the Display at DP1.1 • Offers…
Rate this item
(26 votes)
The Optics 4K supportable HDMI IPKVM Extender, IPKVM-500-ED is designed to access and control video with data (USB, RS-232, DIO and audio) anywhere over the IP Network.    Using a standard Ethernet and provided PC program for assigning IP addresses and information of encoders and decoders, user can configure virtual IP KVM matrix system (M to N) easily.   The transmitter, IPKVM-500-E (Encoder) connected to a HDMI source, encodes the video with data and transmits it over Ethernet. The receiver, IPKVM-500-D (Decoder) connected to a display, receives the encoded signal and decodes it to regenerates the video and data for…
Rate this item
(22 votes)
New optical DisplayPort extender, DPFX-200-TR is designed compact enough to be fitted into various installation environments with two (2) LC fibers connection.   The transmitter and receiver set, DPFX-200-TR enables to transmit 4K (4096x2160) at 60Hz signal up to 100m (328feet) over two (2) LC multi-mode fibers, avoiding any tricks like scaling or data compression for lessening a burden of data transmission.    Between the transmitter and the receiver, pure fiber connection by two (2) LC fibers connector gives clean, secure and easy installation with a perfect electrical isolation and no electrical hazard. The DPFX-200-TR can be operated by USB…
Rate this item
(20 votes)
The Opticis HDMI / DVI IP KVM Extender, IPKVM-350-ED is designed for extending of HDMI, keyboard / mouse and provides unicast (1 to 1) over IP network. But the key feature of Dual-display mode inside IPKVM-350-ED enables user to extend two (2) displays with keyboard / mouse.    The transmitter, IPKVM-350-E (Encoder) connected to a HDMI source, encodes the HDMI by H.264 and transmits the video signal via Ethernet. The receiver, IPKVM-350-D (Decoder) connected to a display, receives the H.264 encoded video signal via the Ethernet and decodes video signal into the HDMI display.    The USB keyboard and mouse…
Rate this item
(10 votes)
New Dual-head DVI optical KVM extender, KVMX-100-TR is designed to extend Dual DVI outputs with keyboard, mouse and bi-directional audio. But the key feature of 2:1 KVM switch function inside KVMX-100-TR enables users to select one PC between two (2) PCs as a host.   KVMX-100-TR transmits DVI, USB HID, RS232 and bi-directional stereo audio signal up to 1.0km (3280feet) over two (2) duplex LC single-mode fibers or 300m (985feet) over two (2) duplex LC multi-mode fibers.   Designed for high resolution performance, it guarantees loss less image quality and no frame dropping to deliver perfect graphic data transmission up…
Rate this item
(9 votes)
The detachable DVI extender, DVFX-110-TR offers easy connection to your existing system with minimum efforts and no modification, since it is designed compactly enough and with all industry standard connectors. The metallic die-casting enclosure gives reliable installation, excellent EMI shields and heat dissipation in harsh and noisy environments.   DVFX-110-TR is capable of driving uncompressed WUXGA (1920x1200) 60Hz DVI signal up to 1,000m (3280feet) over one (1) SC single-mode or 500m (1640feet) over one (1) SC multi-mode fiber. The key features of DVFX-110-TR is, by using an optical passive splitter (OPS-116S), one (1) signal from transmitter can be copied up…
Rate this item
(10 votes)
Active optical HDMI cable, HDFC-100 is designed compact enough to be fitted into various installation environments. The HDFC-100 enables to transmit WUXGA (1920x1200) or 1080p at 60Hz signal up to 50m (164feet) over hybrid cable, avoiding any tricks such as scaling or data compression for lessening a burden of data transmission.   The HDFC-100 gives slim, light, easy installation like a general copper HDMI cable. With low power consumption technology in Opticis, the HDFC-100 can be operated by DDC 5V in HDMI port without any external DC power or USB power.   It supports CEC, EDID, HDCP (High Definition Contents…
Page 1 of 2