Vieta, which celebrated its 50th anniversary in 2004, is today a key manufacturer in the European consumer electronics industry. Founded during 1954 in Barcelona Spain, the company has developed a long and distinguished history with a current global turnover today in excess of EUR 50 Million.

The Vieta organisation is a diverse group of companies with divisions responsible for the manufacture of Pro Audio, Hi Fi, Home Cinema and Car Audio equipment. Yet even today the design and technology of Vieta products are still managed in-house via a dedicated research and development team in its headquarter facilities in Barcelona.

** CAH is the exclusive distributor of PRC, Hong Kong and Macao region.

Website: www.vietapro.com

Rate this item
(1 Vote)
The Ti Line from Vieta is a new, compact, remote-controlled amplifier system, designed for low to medium power use in fixed installations. The small, modular Amplifier Blocks are to DIN rail size and fixing standards, the International standard for AC (mains) wiring, compatible with a range of off-the-shelf accessories such as waterproofing and fire-safety covers, which can be sourced from any electrical trade wholesalers. The Ti Line Blocks simply click into place on the DIN rail. The DIN standard allows the amplifiers to be fitted where all the other electrical mains hardware lives – fuse boxes etc – saving valuable…
Rate this item
(1 Vote)
So-Cube The So Cube is the core of the So Line system. A compact (140mm footprint, 147mm high), stylish, aluminium moulding with white trim containing a 3" omni-directional, 8 ohm, dual-cone driver, a Garwood-specified radio receiver and a 12W RMS amplifier. The moulding is of the highest quality and other colour options can be offered. The driver points down onto a dispersion moulding and is protected by a steel grill so the unit can be handled without damage to the driver. As supplied, the receiver can be switch-tuned to one of 16 frequencies in the 794 to 806 MHz band.…
Rate this item
(1 Vote)
DO-10 The careful design and high acoustic performance make the Do-10 the ideal model for use in high quality sound settings. Its conical diffuser and rotating logo allow it to be used horizontally or vertically. Its 10” speaker with a 1” compression motor mounted on the conical diffuser provides acoustic pressure of 123 dB peak and a frequency response of 55 Hz – 18.5 Khz allows this model to provide sound to many areas that require high performance. The optional LT-10 toroidal transformer allows it to be used on 70-100V cables, respecting the frequency response between 40 Hz – 18…
Rate this item
(2 votes)
Do-2 Do-2 is an ultra compact enclosure with an elegant, discreet and exclusive design that is compatible with the latest atmospheric setting trends. Its acoustic design allows it to obtain a frequency response from 200 Hz to 20 Khz +/-3 dB and horizontal coverage of 110º using just 4 x 2” speakers. For applications that require low tones, we recommend the 80S enclosure with passive assembly, as well as the Do-110S in active assembly. For the purpose of optimising the frequency response and dynamics, Vieta recommends the VDC-1 or VDC-2 processors, thus controlling the maximum power applied to the system.
Rate this item
(1 Vote)
Do-5 The attractive ergonomic design of the Do-5 enables it to be integrated in the many and varied spaces where sound is required. Its acoustic design and rotating logo allow it to be installed horizontally or vertically. It uses a 5” speaker for bass notes and a silk dome tweeter for the high notes. The optional LT-5 toroidal transformer allows it to be used on 70-100V cables, respecting the frequency response between 40 Hz – 18 Khz with a drop of just 1.5 dB at 18 Khz. The core of the transformer has been sized for a better performance at…
Rate this item
(1 Vote)
Do-8 The careful design and high acoustic performance make the Do-8 the ideal model for use in high quality sound settings. Its conical diffuser and rotating logo allow it to be used horizontally or vertically. Its 8” speaker with a 1” compression motor mounted on the conical diffuser provides acoustic pressure of 121 dB peak and a frequency response of 65 Hz – 18.7 Khz allows this model to provide sound to many areas that require high performance. The optional LT-8 toroidal transformer allows it to be used on 70-100V cables, respecting the frequency response between 40 Hz – 18…
Rate this item
(1 Vote)
Do-44 A careful design and high-performance acoustics make the Do-44 the ideal model to be used in both outdoor and indoor settings. Its rotating logo allows it to be used horizontally as well as vertically. The design of the membrane used on the four 4” speakers allows a linear response of between 90 Hz - 17 Khz. Assembly in multi-unit lineal clusters provides exceptional projection of music and voice. This system allows the horizontal coverage to be increased to 100º beyond the 5 Khz frequency, as well as the acoustic pressure, and decrease the compression factor that occurs in the…
Rate this item
(1 Vote)
Do-53 The careful design and top acoustic performance make the Do-53 the ideal model for any kind of indoor or outdoor setting. This enclosure uses two interior and independent volumes to favour the low tone response and the intelligibility of the middle area. The use of a 5” speaker for bass tones and two 3” twin cones provides horizontal dispersion of 120º and a frequency response of 56 Hz – 20 Khz. Its aluminium grille, the stainless steel nuts and bolts, an ABS enclosure protected against ultraviolet rays and tropicalised speakers ensure that it can be used outside. It can…
Rate this item
(1 Vote)
Do-80S The Do-80S is an acoustic enclosure designed to extend the bass response of the Do-2 and Do-5 models in passive mode. There is a 6 dB / octave low pass filter built inside. It's double chamber, with an 8” speaker and extensive membrane coverage provide a compact enclosure. It reduced size means it can be used in any setting.
Rate this item
(0 votes)
Do-110S The Do-110S is an acoustic enclosure designed to extend the low response of the Do-2 and Do-5 models in active mode. It includes a powerful 10” transducer mounted in a bass-reflex enclosure made of reinforced birch board. For the purpose of optimising the frequency response and dynamics, Vieta recommends the VDC-1 or VDC-2 processors, thus controlling the maximum power applied to the system.
Rate this item
(1 Vote)
Do-210S The Do-210S is a sophisticated acoustic enclosure with a triple chamber, designed to extend the low response of the Do-8 and Do-10 models in active mode and ensure the maximum response quality and speaker control. Compact enclosure made of reinforced birch, with two high-performance 10” speakers. For the purpose of optimising the frequency response and dynamics, Vieta recommends the VDC-1 or VDC-2 processors, thus controlling the maximum power applied to the system.