EXPx Series Out Expander

Rate this item
(2 votes)
The EXPx series adds RAD ports to a HAL1x via the Expansion Bus. The EXPx Series requires a HAL1x to operate. Keep in mind that DR remotes are also supported on any RAD port, so the EXPx Series also adds support for additional DR remotes when needed.

EXPx1
Adds 16 in x 16 out digital (8 more RAD ports) to a HAL1x.
Up to 8 Digital Remotes or RADs in any combination.
Chain up to 32 EXP1x units to a HAL1x for 512 in x 512 out.
Unit Size: 1U, 1.75"H x 19"W x 8.25"D (4.4 cm x 48.3 cm x 20.9 cm)
Unit Weight: 5 lb (2.3 kg)

EXP3x
Adds 8 analog line outputs and 8 logic outputs to a HAL1x.
Adds 6 Digital Remote ports & 2 RAD ports to a HAL1x.
Chain up to 32 EXP3x units to a HAL1x for 256 outputs.
Unit Size: 1U, 1.75"H x 19"W x 8.25"D (4.4 cm x 48.3 cm x 20.9 cm)

EXP5x
Adds 12 analog mic / line/ line-plus* inputs to a HAL1x.
*“Line-Plus” Inputs accept a balanced line, or mono'es left & right unbalanced lines.
Adds 4 Digital Remote ports to a HAL1x.
Chain up to 32 EXP5x units to a HAL1x for 384 analog outputs.
Unit Size: 1U, 1.75"H x 19"W x 8.25"D (4.4 cm x 48.3 cm x 20.9 cm)
Read 912 times Last modified on Friday, 27 December 2013 16:40
More in this category: « AM1 Aotomixer HAL1x »